Pick-Off And Separation Mechanism - Gestetner A193 Service Manual

DETAILED DESCRIPTIONS

3.2 PICK-OFF AND SEPARATION MECHANISM

[B]
[C]
[F]
[A]
[B]
[E]
A628O008.wmf
[F]
A628O009.wmf
[D]
[G]
A628O010.wmf
When the print key is pressed, the DF pick-up solenoid [A] turns on and the
originals are lifted up to the pick-up roller [B] by the entrance guide [C]. At the
same time, the DF feed clutch [D] turns on.
300 ms later, the DF feed motor turns on. The original is fed to the paper feed
belt [E] from the top page. The pages are separated by the separation roller
[F] and only the top sheet of the original is fed to the 1st transport roller [G].
The original separation system uses the FRR system.
(A628) 7-8 SM