Gestetner A193 Service Manual page 640

BIT SWITCHES
Relationship between available paper sizes and printer width used in
the setup protocol
Available Paper Size
A4 or 8.5 x 11"
A5 or 8.5 x 5.5"
No paper available (Paper end)
Printer Switch 02
No FUNCTION
0 1st paper feed station usage
for fax printing
0: Enabled
1: Disabled
1 2nd paper feed station usage
for fax printing
0: Enabled
1: Disabled
2 3rd paper feed station usage
for fax printing
0: Enabled
1: Disabled
3 4th paper feed station usage
for fax printing
0: Enabled
1: Disabled
4 Not used
to
7
Printer Switch 03
No FUNCTION
0 Length reduction of received
data
0: Disabled
1: Enabled
1 Not used
2
3
SM
B5
0: The paper feed station can be used to print fax
messages and reports.
1: The specified paper feed station will not be used for
printing fax messages and reports.
Note: Do not disable usage for the paper feed station
which has been specified by User Parameter Switch 0F
(15), or which is used for the Specified Cassette
Selection feature.
Do not change the settings.
0: Incoming pages are printed without length reduction.
Cross reference
Page separation threshold: Printer Sw. 03, bits 4 to 7.
1: Incoming pages are reduced in the length direction
when printing.
Cross reference
Maximum reducible length: Printer Switches 04,
bits 0 to 4
Page separation and data reduction: chapter 2.
Do not change the settings.
Printer width used in the Protocol
(NSF/DIS)
297 mm width
256 mm width
216 mm width
216 mm width
COMMENTS
COMMENTS
4-36 (A639)