Gestetner A193 Service Manual page 277

ROM HISTORY
A193 ROM MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
- (New SP Mode)
SP-606-6: ARDF Main-Scan Magnification
of the rear side.
- (Specification)
When the trays do not have the different
direction papers (same size), the machine
continues to print by sort function even if
the Rotate Sort function is selected.(The
previous version software stops the copy
job when one of tray is empty)
- Stapler may not work when the printer
feeds out the paper with staple while
feeding out the paper into the finisher in
copy or fax mode.
- When 2 sheets of paper remain in the
Duplex Unit and the printer prints out the
image in the duplex mode, the printer
image will be printed on the rear side of the
remaining paper.
- SP5-808: The 3 languages cannot be
selected on the previous software ver.N
(Europe & Asia only)
- New SP is added.
SP5-945:1= When one of the trays is
empty, the paper end indicator (red LED)
lights.
- The DF Jam display is cleared by DF
lifting up and down
-(For U.S.A. only)
-New SP is added. SP5-950: LG size
paper detection on the by pass tray.
When this function is selected and LT
size is inserted in the by-pass tray, the
machine detects it as LG size paper.
-Correspond to the Energy Star standard.
After the fax transmission through ARDF
with the stamper, the registration of the 1st
copied paper by the ARDF is delayed.
(A193)
(Copier Section)
FIRMWARE SERIAL
LEVEL NUMBER
A1935532N June '97
A1935532P August '97
A1935532R September '97
6-16
Rev. 04/2000
FIRMWARE
VERSION
1.54
1.60
1.62
SM