Gestetner A193 Service Manual page 203

SERVICE PROGRAM MODE
2.2.4 Output Check (SP5-804)
CAUTION: To prevent mechanical or electrical damage, do not keep an
electrical component on for a long time.
1. Access SP mode 5-804.
2. Select the SP number that corresponds to the component you wish to
check (see the following table), then press
3. Press "1", then press
4. Exit the SP mode to interrupt the test.
5. If you wish to check another component, re-enter the SP mode.
(A193)
ù
to check that component.
4-36
A193M508.wmf
ù
.
SM