Gestetner A193 Service Manual page 624

BIT SWITCHES
G3 Communication Parameters
Modem rate 144: 14400 bps
120: 12000 bps
96: 9600 bps
72: 7200 bps
48: 4800 bps
24: 2400 bps
Resolution S: Standard (8 x 3.85 dots per mm)
D: Detail (8 x 7.7 dots per mm)
F: Fine (8 x 15.4 dots per mm)
SF: Superfine (16 x 15.4 dots per mm) - optional Page Memory card
required.
21: Standard (200 x 100 dpi)
22: Detail (200 x 200 dpi)
44: Superfine (400 x 400 dpi) - optional Page Memory card required.
Compression MMR: MMR compression
mode MR: MR compression
MH: MH compression
Communication ECM: With ECM
mode SSC: Using SSC
EFC: Using EFC
NML: With no ECM, SSC, or EFC
Width and A4: A4 (8.3"), no reduction
reduction B4: B4 (10.1"), no reduction
A3: A3 (11.7"), no reduction
I/O rate 0: 0 ms/line
25: 2.5 ms/line
5: 5 ms/line
10: 10 ms/line
20: 20 ms/line
40: 40 ms/line
Note:
"40" is displayed while receiving a fax message using AI short protocol.
SM 4-20 (A639)