Gestetner A193 Service Manual page 625

G4 Communication Parameters
Compression MMR: MMR compression
mode MR: MR compression
MH: MH compression
Resolution 21: Standard (200 x 100 dpi)
22: Detail (200 x 200 dpi)
44: Superfine (400 x 400 dpi) - optional Page Memory card required.
Width and A4: A4 (8.3"), no reduction
reduction B4: B4 (10.1"), no reduction
A3: A3 (11.7"), no reduction
Transfer T: Transfer
- : Other
Confidential C: Confidential
- : Other
Other The following information is shown in 6-bit format. Bit 1 is the first bit from
parameters the left, and bit 6 is at the right end.
Bit 1 - Smoothing
Bit 2 - CIL printing
Bit 3 - Not used
Bit 4 - mm/inch conversion 0: Disabled, 1: Enabled
Bit 5 - Engine type
Bit 6 - Resolution unit 0: mm, 1: inch
System Switch 01
No FUNCTION
0 PM call
0: Disabled
1: Enabled
1-7 Not used
(A639)
0: Enabled, 1: Disabled
(Smoothing is disabled in halftone mode.)
0: Enabled, 1: Disabled
0: mm, 1: inch
This bit switch determines whether the machine will
send an Auto Service Call to the service station when it
is time for PM.
Cross reference
Auto service calls: Section 2.1
Do not change the settings.
4-21
BIT SWITCHES
COMMENTS
SM