Gestetner A193 Service Manual page 661

Address
480434 International dial tone frequency
upper limit (high byte)
480435 International dial tone frequency
upper limit (low byte)
480436 International dial tone frequency
lower limit (high byte)
480437 International dial tone frequency
lower limit (low byte)
480438 International dial tone detection
time
480439 International dial tone reset time
(LOW)
48043A International dial tone reset time
(HIGH)
48043B International dial tone continuous
tone time
48043C International dial tone permissible
drop time
48043D International dial wait interval
(HIGH)
48043E International dial wait interval (LOW)
48043F Country dial tone upper frequency
limit (HIGH)
480440 Country dial tone upper frequency
limit (LOW)
480441 Country dial tone lower frequency
limit (HIGH)
480442 Country dial tone lower frequency
limit (LOW)
480443 Country dial tone detection time
480444 Country dial tone reset time (LOW)
480445 Country dial tone reset time (HIGH)
480446 Country dial tone continuous tone
time
480447 Country dial tone permissible drop
time
480448 Country dial wait interval (LOW)
480449 Country dial wait interval (HIGH)
48044A Time between opening or closing
the DO relay and opening the OHDI
relay
48044B Break time for pulse dialling
48044C Make time for pulse dialling
48044D Time between final OHDI relay
closure and DO relay opening or
closing
(A639)
Function
Hz (BCD)
Hz (BCD)
20 ms
Hz (BCD)
20 ms
1 ms
1 ms
1 ms
1 ms
4-57
NCU PARAMETERS
Unit Remarks
If both addresses contain
FF(F), tone detection is
disabled.
If both addresses contain
FF(F), tone detection is
disabled.
If 480438 contains FF, the
machine pauses for the
pause time (48043D /
48043E).
See Note 2 (Belgium).
If both addresses contain
FF(F), tone detection is
disabled.
If both addresses contain
FF(F), tone detection is
disabled.
If 480443 contains FF, the
machine pauses for the
pause time (480448 /
480449).
See Notes 3 and 6.
Function 06-2 (parameter 11).
See Note 3. Function 06-2
(parameter 12).
See Note 3. Function 06-2
(parameter 13).
See Notes 6. Function 06-2
(parameter 14).
SM