Gestetner A193 Service Manual page 148

7. Install the DF unit [A].
8. Slide the DF to the left, then secure the DF unit with 2 screws (M4 x 10).
9. Connect the I/F harness [B] to the copier.
10. Attach the original direction decal [C] to the DF table as shown.
11. Turn both the ac and main switches on. Then, check if the document
feeder works properly.
SM
COPIER INSTALLATION
[A]
[B]
A628I503.wmf
3-9
[C]
A628I505.wmf
(A193)