Gestetner A193 Service Manual page 150

2. Place the copier on the paper tray unit [A] with the pegs [B] fitting into the
copier's peg holes.
3. Remove the copier's paper tray [C].
4. Secure the knob screw [D].
5. Reinstall the copier's second paper tray back into the copier.
6. Remove the connector cover [E].
7. Connect the paper feed unit harness [F] to the copier.
8. Reinstall the connector cover.
9. Secure the joint bracket [G] to the copier (2 screws).
NOTE: Do not pinch the harness.
SM
[C]
[B]
[A]
G697I502.wmf
[F]
3-11
COPIER INSTALLATION
[D]
G697I503.wmf
G697I504.wmf
[E]
[G]
(A193)