Copy Jam History Display (Sp) - Gestetner A193 Service Manual

SERVICE PROGRAM MODE
2.2.5 Copy Jam History Display (SP7-903)
After entering the SP mode, select "1" and press the
message will be displayed.
1
6
1: Jam history no.
5: Second 6: Jam code (see the table below)
8: Paper feed station
Jam Code
10 Registration sensor not
activated (from paper tray).
11 Relay sensor not activated.
30 Upper relay sensor (Optional
PTU) not activated.
31 Lower relay sensor (Optional
PTU) not activated.
50 Registration sensor not
activated (from by-pass feed)
70 Registration sensor remained
activated by paper
90 Fusing exit sensor not activated 150
100 Duplex entrance sensor not
activated
NOTE: The NVRAM can store data for up to 10 copy jams. If more than 10
copy jams occur, the oldest data will be erased.
(A193)
2 3
8
7
2: Main motor operating date
9: Paper size
Meaning
4-38
ù
key. The following
4 5
A193M509.wmf
9
3: Hour
7: Jam location
Jam Code
120 Lower exit sensor not activated.
121 Lower exit sensor remained
activated by paper
122 Upper exit sensor not activated.
123 Upper exit sensor remained
activated by paper
124 Duplex exit sensor not activated.
125 Duplex exit sensor remained
activated by paper
Paper sensor (Optional 1-bin
sorter) does not detect paper.
4: Minute
Meaning
SM