Gestetner A193 Service Manual page 156

[E]
[H]
3. Insert the hooks on the 1-bin sorter tray into the slots in the sorter unit [A].
4. Hook the clips on the 1-bin sorter unit onto the stud pins [B] on the copier.
5. Insert the pins [C] into the pin holes in the copier. Make sure to rest the
1-bin sorter tray on the tray support [D].
NOTE: Do not pinch the I/F harness [E].
6. Open the left cover [F] and secure the unit (2 screws [G]).
NOTE: Use the screw which was removed in step 2 and the screw which
was packed with the unit.
7. Couple the I/F cable connector with the copier.
8. Install the connector cover [H].
9. Turn both the ac and main switches on and check if copies are delivered
to the 1-bin sorter properly.
SM
[A]
A629I502.wmf
[C]
[F]
[G]
3-17
COPIER INSTALLATION
[B]
[D]
A629I503.wmf
(A193)