COPIER INSTALLATION
[D]
[A]
[B]
10. Pull out the paper tray [A] and turn the paper size dial [B] to select the
appropriate size. Then, adjust the side guides [C] and end guide [D] to
match the paper size . Repeat the procedure for the bottom tray.
11. Turn both the ac and main switches on. Then, check if the paper tray unit
works properly.
12. Install the rear hooks of the stands [E] until they snap into place (1 screw).
13. Install the front hooks of the stands [F] until they snap into place (1 screw).
(A193)
[C]
G697I505.wmf
[E]
[F]
3-12
[E]
[F]
G697I506.wmf
SM