Gestetner A193 Service Manual page 648

BIT SWITCHES
Communication Switch 0B
No FUNCTION
5 Action when there is no fax
number in the programmed
Quick/Speed dials which
meets the requesting
terminal's own fax number
0: Transfer is Disabled
1: Transfer is Enabled
6 Not used
7
Communication Switch 0C
No FUNCTION
0 Number of digits compared to
to find the requester's fax
4
number from the
programmed Quick/Speed
Dials when acting as a
Transfer Station
5 Not used
to
7
SM
After the machine receives a transfer request, the
machine compares the last N digits of the requesting
terminal's own fax number with all the Quick/Speed
dials programmed in the machine. (N is the number
programmed in communication switch 0C.)
0: If there is no matching number programmed in the
machine, the machine rejects the transfer request.
1: Even if there is no matching number programmed in
the machine, the machine accepts the transfer request.
The result report will be printed at the transfer terminal,
but will not be sent back to the requesting terminal.
Refer to "Transfer Broadcasting" in chapter 2 for more
details.
Do not change the settings.
00 - 1F (0 to 31 digits)
After the machine receives a transfer request, the
machine compares the telephone number sent from the
Requesting Terminal with all Quick/Speed Dials
programmed in the machine, starting from Quick Dial 01
to the end of the Speed Dials.
This number determines how many digits from the end
of the telephone numbers the machine compares.
If it is set to 00, the machine will send the report to the
first Quick/Speed Dial that the machine compared. If
Quick Dial 01 is programmed, the machine will send the
report to Quick 01. If Quick Dial 01 through 04 are not
programmed and Quick Dial 05 is programmed, the
machine will send the report to Quick 05.
Default setting - 05(H) = 5 digits
Refer to "Transfer Broadcasting" in chapter 2 for more
details.
Do not change the settings.
4-44
COMMENTS
COMMENTS
(A639)