Gestetner A193 Service Manual page 570

PAPER SIZE SELECTION
- Reduction Rate Equalization On (Example Diagram: Two-page Printout) -
1. The machine determines how many pages will be needed to print the
message, taking the following into account:
The final page (n) is such that the received image length is within (paper
length x n) + 20 mm
The data must be reduced to fit on pages of length (paper length - 4 mm),
with an equal reduction rate for each page
The last 10 mm of the previous page will be repeated at the top of the
next page (this length can be adjusted or repetition can be disabled).
2. The machine prints all the pages, at the same reduction rate.
If the customer does not want to receive a fax message on separate pages,
page separation can be disabled. However, once it has been disabled, the
machine does not print the received fax message until a paper size which
can hold the received fax image on one page is set in a cassette. Keep page
separation enabled if the customer expects to receive a fax message that is
longer than the copy paper.
Cross Reference
Parameter
Reduction in sub-scan direction on/off
Equalizing reduction rate among separated
pages
Page separation threshold when reduction is
disabled
Page separation threshold when reduction is
enabled
Page separation on/off
Page separation mark on/off
Image duplication with page separation, on/off Printer Switch 00, bit 1
Length of the repeated image on the next
page
SM
Switch
Printer Switch 03, bit 0
Printer Switch 0E, bit 7
Printer Switch 03, bits 4-7 6 mm
Printer Switch 04, bits 0-4 20 mm
Printer Switch 0E, bit 2
Printer Switch 00, bit 0
Printer Switch 04, bits 5-6 10 mm
2-16
a194d525.wmf
Default Setting
Enabled
(except
Germany)
Enabled
Enabled
Enabled
Enabled
(A639)