Double Copy Registration; Scanning; Registration: Platen Mode - Gestetner A193 Service Manual

11.1.4 Double Copy Registration

NOTE: 1) Perform this adjustment after completing the registration
adjustment and the blank margin adjustment for single copies.
2) Select the double copies mode by the Double Copies key using
the copy mode to print the test pattern.
1. If you need to adjust the double copy registration, use SP1-006.

11.2 SCANNING

NOTE: 1) Perform or check the printing registration/side-to-side adjustment
and the blank margin adjustment, before performing the following
scanner adjustment.
2) Use an OS-A3 test chart to perform the following adjustments.

11.2.1 Registration: Platen Mode

1. Place the test chart on the exposure glass and make a copy from one of
the feed stations.
2. Check the leading edge and side-to-side registration, and adjust each
using the following SP modes if necessary.
Leading edge
Side-to-side
A: Leading Edge Registration
B: Side-to-side Registration
SM
COPY ADJUSTMENT PRINTING/SCANNING
A A: Double Copy Registration
A193R514.wmf
SP mode
SP4-010
SP4-011
5-41
A
B
A193R515.wmf
(A193)