Gestetner A193 Service Manual page 461

Mode No.
Class
Class 3
1 and 2
Factory
V
CONT
Counter
2-995* 2
TD Sensor
Control Value
Setting
1
2-996*
Manual
2 V
CONT
Counter
TD Sensor
Control Value
1
Display
2-997*
(Installation)
Installation
2 V
CONT
Counter
Printer Main
Scan
Magnification
2-998*
TD Sensor
Control Value
Selection
2-999*
Main Scan
Magnification
4-008 * (Scanning)
SM
SERVICE PROGRAM MODE TABLE
Function
Displays what the total counter value was
when the TD sensor control value was
adjusted in the factory.
When V is adjusted at the factory,
CONT
the counter is automatically set at
"9999999".
Inputs the TD sensor control value
(V )
CONT
If the V voltage is out of
CONT
specification after replacing the IOCSS
board, adjust V using this SP mode.
CONT
After changing this value, SP2-999 should
be set at "1". See "Replacement and
Adjustment - IOCSS Board".
Displays what the total counter value was
when the TD sensor control value was
adjusted in the field.
Displays the TD sensor control value
(V ) which was adjusted at
CONT
installation. The machine uses this value
only if SP 2-999 is set to 2.
Displays what the total counter value was
when the TD sensor control value was
adjusted at machine installation.
Adjusts the magnification in the main scan
direction for the printer.
Use the •/∗ key to toggle between + and -.
The specification is ± 1%. See
"Replacement and Adjustment - Copy
Image Adjustments" for details.
Selects the TD sensor control voltage
If the V value is out of specification
CONT
after replacing the IOCSS board, this
value should be changed to "1" after
inputting the correct value with SP 2-996.
See "Replacement and Adjustment -
IOCSS Board".
Adjusts the magnification in the main scan
direction for scanning.
Use the •/∗ key to toggle between + and -.
See "Replacement and Adjustment -
Copy Image Adjustments" for details.
13-27
Settings
80 ~ 170
1/step
140 (A193)
120 (A224)
- 0.5 ~ + 0.5
0.1%/step
0.0 %
0: Factory
1: Manual
2: Installation
Never select 2.
- 1.0 ~ + 1.0
0.5 %/step
+ 0.0 %
A224