Gestetner A193 Service Manual page 643

Printer Switches 0F
No FUNCTION
0 Not used
1
2 Duplex printing
0: Disabled
1: Enabled
3 Not used
4 Printing fax messages in
Restricted Access mode
0: Enabled
1: Disabled
5 Not used
6 Wait timer for Duplex Print Mode.
,   
  = 1 min.,  
7 0 No 1
=

 
0
0 limit
 
 
If copy job or printer controller is using the duplex unit when the fax unit is going to print
a fax message in duplex mode, the fax unit waits untill the duplex unit becomes
available. The time period that the fax unit will wait can be specified, as shown above. If
the timer expires, the message is printed on single sides.
(A639)
Do not change the setting.
1: The machine prints received fax messages in duplex
printing mode.
Cross Reference
"Duplex Printing" in chapter 2
Do not change the setting.
1: The machine holds the received fax messages until
the machine exits the restricted access mode.
If the machine enters the restricted access mode again
while printing fax messages, the machine stops printing
until the machine exits the mode again.
Cross reference
Restricted access on/off - Key operator mode 01-3
Do not change the setting.

 = 3 min.,  
0 1
= 10 min.


1
1

  
4-39
BIT SWITCHES
COMMENTS
SM