Gestetner A193 Service Manual page 153

COPIER INSTALLATION
5. Swing the lower transport guide plate [A] down as shown in the illustration.
6. Remove the lower transport guide plate and pull it out as shown in the
illustration.
7. Push the inverter unit [B] into the copier until the pin is completely
inserted in the pin hole. It may be necessary to rotae the blue knob for
clearance.
8. Secure the inverter unit with the screw which was removed in step 4.
(A193)
G694I504.wmf
[B]
3-14
[A]
G694I503.wmf
G694I505.wmf
SM