Table of Contents
Advertisement
3. TRANSFER UNIT
3.1 TRANSFER UNIT
1. Remove the PCU.
2. Raise the transfer unit [A] vertically and remove it.
3.2 TRANSFER ROLLER/SEPARATION UNIT
[D]
1. Remove the transfer unit. (See Transfer Unit.)
2. Remove the transfer roller [A].
NOTE: 1) Clean the bushings [B] and pulleys [C]. When replacing the
transfer roller, replace the bushings and pulleys.
2) Do not touch the surface of the transfer roller with bare hands.
When cleaning the transfer roller, use a blower brush, not a
cloth.
3. Remove the discharge brush [D].
SM
[A]
[C]
5-9
TRANSFER UNIT
A193R009.wmf
A193R010.wmf
[A]
[C]
[B]
(A193)
Advertisement
Chapters
Table of Contents
