Paper End Sensors - Gestetner A193 Service Manual

PAPER FEED/ REGISTRATION

8.6 PAPER END SENSORS

[A]
[C]
1. Remove the rear cover. (See Rear Cover.)
2. Disconnect the connectors from the right half of the IOCSS board [A] and
swing out the IOCSS board (4 screws).
3. Remove the paper end sensor assemblies [B] (1 screw and 1 connector
each).
4. Remove the paper end sensors [C].
(A193)
[B]
A193R032.wmf
5-32 SM