Lower Limit Sensor - Gestetner A193 Service Manual

7.6 LOWER LIMIT SENSOR

[A]
[B]
1. Remove the top cover, front cover, and rear cover (see Exterior Cover
Removal).
2. Remove the belt stoppers [A] (2 screws each).
3. Lift up the bottom plate [B], then remove the lower limit sensor [C] (1
connector).
NOTE: Before reinstalling the belt stoppers [A], move the bottom plate to its
lowest possible position.
SM
REPLACEMENT AND ADJUSTMENT
A667R505.wmf
14-21
[A]
[C]
A224