Tray Lift Motor Removal - Gestetner A193 Service Manual

7.3 TRAY LIFT MOTOR REMOVAL

[A]
[B]
1. Remove the top cover, front cover, and rear cover (see Exterior Cover
Removal).
2. Remove the belt stoppers [A] (2 screws each).
3. Remove the two screws [B] holding the tray lift motor.
4. Lift up the bottom plate [C], then take out the tray lift motor [D] (1
connector).
NOTE: Before reinstalling the belt stoppers [A], move the bottom plate to its
lowest possible position.
SM
REPLACEMENT AND ADJUSTMENT
[D]
14-19
[A]
[C]
A667R502.wmf
A224