Gestetner A193 Service Manual page 189

SERVICE PROGRAM MODE
Mode No.
Class
Class 3
1 and 2
5-930*
5-932
5-940*
5-941*
⇒
5-942*
5-943*
5-944*
5-945*
5-991*
5-992
(A193)
Fax Selects whether the fax mode application
Forwarding key is accepted or not in the SC condition.
Mode
When an SC condition occurs while
incoming data has been stored in the SAF
memory, change the value to "1" to
access fax mode. Then forward the
incoming data to another fax machine by
using the fax mode bit switches.
Program Downloads the system program from a
Download ROM board to the Flash Memory on the
BICU board. (Copier mode software only)
See "Service Tables - Program
Download" for details.
This SP can be operated when the ROM
board is installed in the machine .
Image Selects whether the image rotation
Rotation Mode function is performed or not.
If there is a problem with the MSU, image
rotation may lead to abnormal copies. If
so, disable image rotation while waiting
for new parts.
Duplex Blank Selects whether the blank page is made
Page on the front side or back side when
duplex copy mode is selected.
Image Selects the image compression method
Compression for memory mode copying.
Method (Factory use only)
Charge Roller Selects whether the charge roller home
H.P Detection position is detected or not.
Do not use in the field.
APS Mode Selects whether the APS mode is
selected as power-up default or not.
Memory Copy Selects whether or not the memory copy
Priority mode is selected when the main switch is
turned on.
VRAM Data This SP mode is only used by the
designer.
Download
Do not change the value.
System Prints the machine status history data list.
Parameter See the "SYSTEM PARAMETER AND
and Data List DATA LISTS" section for how to print the
Printing lists.
Function
4-22
Rev. 6/13/97
Settings
0: No
1: Yes
0: No
1: Yes
0: Yes
1: No
0: Back side
1: Front side
0: MH
1: MR
2: MMR
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: Off
1: On
0: No Print
1: SP mode
2: UP mode
3: Log data
SM