Gestetner A193 Service Manual page 703

Table of Contents

Advertisement

A639 ROM MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
- In the G3or G4 receiving mode, when the
memory is full at the first block of any page, a
part of the previous page is missing.
- Receiving error in G4 mode
When it is waiting for RSSP (or RSSN)
signal after sending "CONN" signal,
the machine displays "communication error" if
"DISC" signal comes.
- The periodical auto service call function
does not work.
The Two-in-one Function from HLT to LT size
paper is not working.
- (New System Switch)
When the closed network is enabled and the
ID is not programmed, all reception is not
available (Specification). The System SW is
added to protect this problem.
Swsys -1E Bit 4. When the closed network is
turned on and the ID is not set:
0: The closed network is not available.
1: Only the transmission is available.
- The display of the remote terminal ID at AI
redial:
Swsys-1E Bit 5
0: RTI/CSI is displayed.
1: Input Fax Number is displayed.
- LCT and Tray of the duplex unit are
supported.
- New HDD is supported.
- NEST card option is supported.
The received files cannot be printed out from
HDD. When a small amount of data (less
than 2K Bytes) is received and the
communication is finished before the writing
job on the HDD is finished, the data is not
completed on the HDD.
SM
(Fax Section)
RICOH P/N
QTY
SERIAL
NUMBER
A1945581 F
1
March '97
A1945581 G
1
A1945581 H
1
August '97
6-11
REV. 05/98
LOCATION
May '97
(A639)

Advertisement

Table of Contents
loading

This manual is also suitable for:

A224

Table of Contents