Gestetner A193 Service Manual page 642

BIT SWITCHES
Printer Switch 05 - Not used (do not change the settings)
Printer Switch 06 - Not used (do not change the settings)
Printer Switch 07 - Not used (do not change the settings)
Printer Switch 08 - Not used (do not change the settings)
Printer Switch 09 - Not used (do not change the settings)
Printer Switch 0A - Not used (do not change the settings)
Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0D - Not used (do not change the settings)
Printer Switch 0E
No FUNCTION
0 Paper size selection priority
0: Width
1: Length
1 Paper size selected for
printing A4 width fax data
0: 8 x 11" size
1: A4 size
2 Page separation
0: Enabled
1: Disabled
3 Not used
to
6
7 Equalizing the reduction rate
among separated pages
(Page Separation)
0: Enabled
1: Disabled
SM
0: A paper size which has the same width as the
received data is selected first.
1: A paper size which has enough length to print all the
received lines without reduction is selected first.
This switch determines which paper size is selected for
printing A4 width fax data, when the machine has A4
and 8" x 11" size paper at the same time.
1: If all paper sizes in the machine require page
separation to print a received fax message, the machine
does not print the message (Substitute Reception is
used).
After a larger size of paper is set in a cassette, the
machine automatically prints the fax message.
Do not change the settings.
0: All the pages are reduced with the same reduction
ratio, when page separation has taken place.
1: Only the last page is reduced to fit the selected paper
size when the page separation has taken place. Other
pages are printed without reduction.
4-38
COMMENTS
(A639)