Paper Feed Roller/Friction Pad; By-Pass Feed Paper Width Sensor - Gestetner A193 Service Manual

PAPER FEED/ REGISTRATION

8.3 PAPER FEED ROLLER/FRICTION PAD

[A]
1. Remove the registration sensor and paper end sensor unit. (See By-pass
Feed Paper End Sensor/Registration Sensor.)
2. Remove the paper feed roller [A] (1 hook).
3. Remove the friction pad [B].
NOTE: Do not lose the spring [C].

8.4 BY-PASS FEED PAPER WIDTH SENSOR

[B]
[A]
1. Remove the by-pass feed table assembly (see By-pass Feed Tray).
2. Remove the table lever [A] (1 snap ring and 1 pin).
3. Remove the by-pass feed table [B] (2 hooks).
4. Remove the width sensor spring plate [C].
5. Remove the by-pass feed paper width sensor [D] (1 screw).
(A193)
[C]
A193R029.wmf
A193R030.wmf
5-30
[B]
[D]
[C]
SM