Installation Requirements; Environment; Machine Level; Machine Space Requirement - Gestetner G056 Service Manual

1. INSTALLATION

1.1 INSTALLATION REQUIREMENTS

1.1.1 ENVIRONMENT

1. Temperature Range:
2. Humidity Range:
3. Ambient Illumination:
4. Ventilation:
5. Avoid areas which are exposed to sudden temperature changes. This includes:
1) Areas directly exposed to cool air from an air conditioner.
2) Areas directly exposed to heat from a heater.
6. Do not place the machine in an area where it will be exposed to corrosive
gases.
7. Do not install the machine at any location over 2,500 m (8,125 ft.) above sea
level.
8. Place the machine on a strong and level base. (Inclination on any side should
be no more than 5 mm.)
9. Do not place the machine where it may be subjected to strong vibrations.

1.1.2 MACHINE LEVEL

Front to back: Within 5 mm (0.2") of level
Right to left: Within 5 mm (0.2") of level

1.1.3 MACHINE SPACE REQUIREMENT

Place the machine near the power source, providing clearance as shown.
A: Over 10 cm (4")
B: Over 10 cm (4")
C: Over 100 cm (40")
D: Over 10 cm (4")
SM
10 °C to 32 °C (50 °F to 89.6 °F)
15 % to 80 % RH
Less than 2,000 lux (do not expose to direct sunlight).
3 times/hr/person
A
1-1
INSTALLATION REQUIREMENTS
B
D
C
G056I500.WMF
G056/G058