Software Reset; Resetting The System; Software And Copy Setting Reset (Up Mode); Resetting Copy/Document Server Features Only - Gestetner B070 Service Manual

SOFTWARE AND COPY SETTING RESET (UP MODE)

5.8 SOFTWARE AND COPY SETTING RESET (UP MODE)

5.8.1 SOFTWARE RESET

The software can be rebooted when the machine hangs up. Use the following
procedure.
Turn the main power switch off and on.
-or-
Press and hold down
beeps once, release both buttons. After "Now loading. Please wait" is displayed for
a few seconds, the copy window will open. The machine is ready for normal
operation.

5.8.2 RESETTING THE SYSTEM

The system settings in the UP mode can be reset to their defaults using the
following procedure.
1. Make sure that the machine is in the copier standby mode.
2. Press the User Tools key.
3. Hold down the "#" key and touch the "System Setting" key.
4. A confirmation message will be displayed, then press "Yes".

5.8.3 RESETTING COPY/DOCUMENT SERVER FEATURES ONLY

The copy/document server settings in the UP mode can be reset to their defaults
using the following procedure.
1. Make sure that the machine is in the copier standby mode.
2. Press the User Tools key.
3. Hold down the "#" key and touch "Copy/Document Server Features" key.
4. A confirmation message will be displayed, then press "Yes".
B070/B071
CÓPIA NÃO CONTROLADA
together for over 10 seconds. When the machine
5-94
CÓPIA NÃO CONTROLADA
SM