Hot Roller Unit Removal And Pressure Roller Replacement - Gestetner A294 Service Manual

FUSING UNIT
6.9.2 HOT ROLLER UNIT REMOVAL AND PRESSURE ROLLER
REPLACEMENT
[B]
[C]
A294R501.WMF
1. Remove the oil supply and cleaning web unit. (See Oil Supply and Cleaning
Web Unit Removal.)
2. Remove the top cover [A] of the fusing unit (1 screw).
NOTE: When re-installing this cover, align the cutouts [B] and projections [C]
and slide the cover to the right. Make sure that the cover does not
pinch the thermistor and thermofuse cables against the stay.
3. Turn the hot roller stripper unit [D] clockwise approximately 160° and slide the
pivot shaft out of the cutout [E].
4. Release the fusing pressure by turning the pressure lever [F] 1/4 of a turn
counterclockwise with a screw driver.
NOTE: If the fusing pressure is still released when re-installing the inner cover
of the fusing unit, that cover cannot be installed.
A294/A295
CÓPIA NÃO CONTROLADA
[A]
[F]
6-84
CÓPIA NÃO CONTROLADA
[E]
[D]
A294R502.WMF
SM