Master Cylinder; Removal And Installation - Mazda 323 1988 Workshop Manual

MASTER CYLINDER
6
MASTER
CYLINDER
REMOVAL AND INSTALLATION
1. Remove the parts in the sequence shown in the figure.
2. install in the reverse order of removal.
3. After installation, perform air bleeding.
r- 1. Clutch pipe
2. Nut
3. Master cylinder
4. Gaskst.
5. Spacer.
Clutch Pipe
Use SST to disconnect and connect the clutch pipe.
Caution
Clutch fluid will damage painted surfaces. Use
a container or rags to collect the fluid.
If fluid does get on a painted surface, wipe it
off immediately.
6-11