Inspection - Mazda 323 1988 Workshop Manual

9
REAR AXLE
a
Outer
race
(5) Locknut
Caution
a) Raise the nut tab to loosen the locknut.
b)To remove the right side rear locknut, turn
it clockwise.
(6) Dust cover
(7) Lateral link through bolt
(8) Hub spindle to shock absorber through bolts
(9) Hub spindle
(10) Rear axle hub
Note
a) Do not disassemble the bearing if it is not
necessary.
b)Set a brass rod on the race through the
grooves in the hub and remove the race
with a hammer.
INSPECTION
Rear Hub Spindle
Check the following and, if there is any problem
replace the rear hub spindle.
I, Cracks or damage.
2. Wear or rust on the oil seal contact surface
Bearing
Wash all parts, check the following and replace if
necessary.
1, Abnormal wear, damage or seizure of bearing.
Note
Replace the bearing as a set (inner and outer
races).
2. Damaged hub grease cap