Mazda 323 1988 Workshop Manual page 984

ADJUSTABLE SHOCK ABSORBER 15
TROUBLESHOOTING
Abnormal conditions
Mode switch does not operate.
Indicator light does not operate.
Check power window fu Short circuit (broken wires)
OK
Turn Ign switch to ON
Confirm 12V on wire of shock absorber switch
Broken wire (Fuse - Switch)
I
OK
Check continuity between
absorber swtich and ground.
Defective ground circuit
I
OK
-1 NG
Check shock absorber switch (See P15-90) Defective shock absorber switch
1
0
Install the switch.
OK
Disconnect all actuator connectors and check as
follows
@ In SPORT mode, confirm 12V on RG wire
(RW wire for rear).
@ In SPORT mode, confirm continuity to RL wire
(R wire for rear) to ground.
@ In NORMAL mode, confirm 12V on RL wire
(R wire for rear).
@ In NORMAL mode, confirm continuity of RB
wire (RY wire) to ground.
NG
Broken wire (Switch - Actuator corinector)
OK
Defective actuators. Check actuators
(See P15-90)
15-89