On-Vehicle Maintenance; Timing Belt - Mazda 323 1988 Workshop Manual

ON-VEHICLE MAINTENANCE (TIMING BELT) 1
A
ON-VEHICLE MAINTENANCE
TIMING BELT
Removal
1. Disconnect the battery negative cable.
2. Remove the parts in the numbered sequence shown in the figure
I. Engine side cover
2. A/C and P/S drive belt and pulley
3. Alternator and alternator drive belt
4. Water pump pulley
Note
5. Crankshaft pulley and baffle plate
6. Upper and lower timing belt cover
7. Timing belt tensioner and spring
8. Timing belt
Remove the No.3 engine mount installation nuts and lower the engine to remove A/C and
P/S pulley and the crankshaft pulley.
IA-11