Mazda 323 1988 Workshop Manual page 36

ON-VEHICLE MAINTENANCE (CYLINDER HEAD) 1
A
1
Camshaft pulley
1. Remove the cylinder head cover.
2. Hold the camshaft using a suitable wrench on the
cast hexagon.
3. Remove the camshaft pulley.
Disassembly of Cylinder Head
Refer to page l A-32
Inspection
Refer to page IA-37
Assembly
Refer to page l A--59
Installation
I. Thoroughly remove all dirt and grease from the top
of the cylinder block with a rag.
2. Place the new cylinder head gasket in position.
3. Install the cylinder head, and tighten the cylinder
head bolts gradually in the order shown in the
figure.
Tightening torque:
75-81 N.m (7.7-8.3 m-kg, 56-60 ft-lb)
lA--17