Mazda 323 1988 Workshop Manual page 649

REAR DIFFERENTIAL 9
4. Remove the companion flange using
SST.
5. Replace the oil seal.
To install the oil seal using the
SST.
Note
Apply a thin coat of grease (lithium base, NLGI
No. 2) to the oil seal lip.
6. Install the companion flange and tighten the lock
nut
to get the specified starting torque (above step
2).
7. Install the propeller shaft.
Output shaft oil seal
1. Put mating marks on the output shaft and driveshaft
and remove the bolts and nuts.
9-43