IA
ASSEMBLY
2. install the rocker arm and rocker shaft assembly.
Caution
The bolts must
be tightened
evenly
and in the
order
shown
in the figure.
Tightening
torque:
22-28
N.m (2.2-2.9
m-kg,
18-21
ft-lb)
Cylinder
Head
Cover
1. Apply a coat of sealant in the groove as shown.
2. Place the gasket in position.
3. Install the cylinder head cover with new seal
washers.
Tightening
torque:
5-9
N.m (0.5-0.9
m-kg,
43-78
in-lb)
4. Install the filler cap and the ventilation hose.
Water
Pump
1. Remove any dirt or old gasket from the water pump
mounting surface.
2. Place a new water pump gasket in position.