Release Cylinder; Removal And Installation - Mazda 323 1988 Workshop Manual

RELEASE CYLINDER
6
RELEASE CYLINDER
REMOVAL AND INSTALLATION
1. Remove the parts in the sequence shown in the figure.
2. Install in the reverse order of removal.
3. After installation, perform air bleeding.
1. Clutch pipe
2. Clip
3. Release cylinder
Flare Nut
Use SST to loosen and tighten the flare nut of the
clutch pipe.
Note
After disconnecting the clutch pipe, plug it to
avoid fluid leakage.
Caution
Clutch fluid will damage painted surfaces. Use
a container or rags to collect the fluid.
If fluid does get on a painted surface, wipe it
off immediately.
Clip
When assembling,insert the clip between the brack-
et and flare nut of the clutch pipe.
Caution
a) The hexagon nut must seat correctly into
the hexagonal groove of the bracket.
b)The flexible hose must not be twisted.
6-15