Mazda 323 1988 Workshop Manual page 37

IA
ON-VEHICLE MAINTENANCE (CYLINDER HEAD1
Dowel
pin
and
pin groove
83"01A-Oi !8
P O-"";'
Sealr-+
4. Install the camshaft pulley onto the dowell pin and
keyway with the matching mark straight up, so that
the timing marks on the camshaft pulley and cyl-
inder head align.
Tightening torque:
49-61 N.m (5.0-6.2 m-kg, 36-45 ft-lb)
5. Apply a coat of sealant to the cylinder head cover
as shown in the figure.
6. Install the cylinder head cover.
Tightening torque:
5-9 N,m (0.5-0.9 m-kg, 43-78 in-lb)
7. Install the timing belt (Refer to page 1 A-l 1)
lA-18