Mazda 323 1988 Workshop Manual page 601

DISASSEMBLY
8
3. Remove all snap rings using a flat-tip screwdriver.
Caution
The snap rings cannot be re-used.
4. Remove the bearings by lightly tapping the yoke
with a brass hammer as shown in the figure.
5. Remove the yoke.
Spider
1. Remove the bearings as shown in the figure.
2. Remove the spider.
Center Yoke
1. Make mating makes on the yoke and shaft.
2. Remove the lock nut.
3. Remove the center yoke and center bearing sup-
port assembly using SST.
323 Revised 10187
a--7