Mazda 323 1988 Workshop Manual page 173

OIL COOLER
2B
OIL COOLER
REMOVAL
1. Drain the engine oil.
2. Remove the under cover.
3. Remove the oil filter with an oil filter wrench,
4. Disconnect the water hoses
5. Remove the oil cooler.
INSTALLATION
1. Install the oil cooler.
Tightening torque:
29-39 N.m (3.0-4.0 m-kg, 22-29 ft-lb)
2. Install the oil filter (Refer to page 28-4).
3. Install the under cover.
4. Add engine oil to the correct level.
5. After installing the filter, check that there is no oil
leakage while the engine is running.
6. Recheck the oil level using the dipstick.
28-5