;j tJ
RADIATOR
RADIATOR
REMOVAL AND INSTALLATION
1, Drain the coolant.
2. Remove
the parts in the numbered
sequence
shown
in the figure.
3. Install in the reverse
order of removal.
1. Radiator
cowling
2. Cooling
fan
3. Cooling
fan motor
Note
4. Radiator
hose
5. Reserve
tank hose
6. Radiator
Position the hose clamp in the original
location
on the hose and squeeze it lightly with
large pliers to ensure a good fit.
INSPECTION
Check
the following
points;
repair
or replace
,if
necessary:
1, Cracks,
damage,
or water leakage
2. Bent fins (repair
by using a screwdriver)
3. Distorted
or damaged
radiator
inlet.