Mazda 323 1988 Workshop Manual page 227

INTAKE AIR SYSTEM
4A
Air Flow Meter
Removal and Installation
1. Remove the high tension lead and ignition coil con-
nectors.
2. Loosen the hose band and remove the intake air
hose.
3. Remove the attaching bolts.
4. Turn the air cleaner cover upside down and re-
move the attaching nuts.
5. Remove the air flow meter.
Install in the reverse order of removal.
Throttle Body
Removal and Installation
1. Drain the water from radiator
2. Disconnect the accelerator cable from the throttle
linkage
3. Disconnect the air funnel
4. Disconnect the hoses and tubes
5. Disconnect the throttle sensor connector
6. Remove the attaching nuts and bolts of throttle
body
7. Remove the throttle body
8. Install in the reverse order of removal
323
Revised IO/87
4A-27