Mazda 323 1988 Workshop Manual page 38

ON-VEHICLE MAINTENANCE (CYLINDER HEAD) 1
A
4
a
8. Install the upper timing belt cover.
Tightening torque:
8-l 1 Nm (0.8-l .l m-kg, 69-96 in-lb)
9. install the water pump pulley.
Tightening torque:
8-11 N.m (0.6-1.1 m-kg, 69-95 in-lb)
IO. Install engine ground, front and rear engine
hanger.
Tightening torque:
Front: 37-63 N.m
(3.8-6.4 m-kg, 27-46 ft-lb)
Rear: 19-30 N.m
(1.9-3.1 m-kg, 14-22 ft-lb)
11. Install the exhaust manifold.
Tightening torque:
16-23 N.m (1.6-2.3 m-kg, 12-17 ft-lb)
12. Install the exhaust manifold insulator.
13. Install the water bypass hose bracket.
14. install the intake manifold assembly.
Tightening torque:
19-26 N.m (1.9-2.6 m-kg, 14-19 ft-lb)
15. Install the thermostat assembly. (Refer to 1 A-66.)
16. Connect the upper radiator hose.
Note
Position the hose clamp in the original loca-
tion on the hose and squeeze it lightly with
large pliers to ensure a good fit.
IA-19