Mazda 323 1988 Workshop Manual page 472

7A
ASSEMBLY
Lock Nut (primary gear)
Lock the shaft with the
SST
before tightening the lock-
nut. Use a new locknut and tighten it to the specified
torque. Stake the locknut to the groove in the prima-
ry shaft.
Tightening torque:
128-208
N.m
(13-21
m-kg, 94-152 ft-lb)
Shift Fork (5th gear)
Install the shift fork together with the clutch hub as-
sem bly.
Lock Nut (5th clutch hub)
Put the transaxle in 1st or 2nd aear and lock the pri-
mary shaft with the
SST
and tighten the locknut'on
the secondary shaft to the specified torque. Stake the
locknut to the groove in the secondary shaft.
._d'
Tightening torque:
127-206 N.m (13-21 m-kg, 94-152 ft-lb)
5th Gear End Play
Measure the width of both the gear sleeve and the
5th gear.
The 5 the gear end play equals the difference be-
tween the gear sleeve and the 5th gear.
Standard: 0.15-0.282 mm (0.008-0.010 in)
Limit: 0.31 mm (0.012 in)
,/
7A-48