Mazda 323 1988 Workshop Manual page 818

13
LATERAL LINK AND TRAILING LINK, REAR STABILIZER
Crossmember
Before lowering the crossmember, remove the foilow-
ing parts.
1, Brake pipe clips
2. Center bearing support (4WD)
3. Main silencer hanger (4WD)
REAR STABILIZER
REMOVAL AND INSTALLATION
1. Jack up the rear of the vehicle and support it with safety stands.
2. Remove the parts in the numbered sequence shown in the figure.
3. Install in the reverse order of removal.
83U13X-02
1. Nut
4. Retainers, bushing and
6. Bushing and bracket
2. Bushing
and retainer
spacer 7. Stabilizer
3. Retainer, bushing
and bolt 5. Bolt
13-20