Mazda 323 1988 Workshop Manual page 583

76
ASSEMBLY
Idle Gear
Install the idle gear
Control End
Tap the spring pin in with a pin punch and hammer.
Reverse Lever Support and Shift Gate
1. Install the reverse lever support and shift gate.
2. Install the shift rod (5thlreverse)
Tightening torque: 11.8-15.7 N,m
(1.2-l .6 m-kg, 8.7-i 1.6 ft-lb)
3. Assemble the shift gate and install the shift rod then
align the control lever and shift gate.
4. Tighten the set bolt.
Tightening torque: 11.6-15.7 N.m
(1.2-l .6 m-kg, 6.7-l 1.6 ft-lb)