Mazda 323 1988 Workshop Manual page 99

IB
ON-VEHICLE MAINTENANCE (TIMING BELT)
1, Mark the direction of rotation on the timing belt.
Damage,
wear
mark
Note
The
direction
arrow is so the belt can be rein-
stalled in the same direction.
2. Remove the timing belt,
Caution
Do not allow any oil or grease on the timing
belt.
Inspection
Refering to page 1 B-49, inspect the following parts:
1. Timing belt
2. Timing belt tensioner and spring
3. Timing belt pulley
4. Camshaft pulley
Installation
1, Be sure that the timing mark on the timing belt
pul-
ley is aligned with the matching mark.
2. Be sure that the matching mark on the camshaft
pulley is aligned with seal plate matching mark. If
it is not aligned, turn the camshaft to align.
18-12