Mazda 323 1988 Workshop Manual page 768

11
FRONT DISC BRAKE
REMOVAL~AND INSTALLATION
Note
Use the SST (49 0221 SOOC) to push the pis-
ton into the cylinder.
1. Jack up the front of the vehicle and support it with safety stands.
2. Remove the wheels and remove the front disc brakes in the numbered sequence shown in the figure.
3. Install in the reverse order or removal.
FRONT DISC BRAKE
REPLACEMENT OF DISC PAD
Caution
Replace the left and right pads at the same
time.
1. Jack up the front of the vehicle, and support it with
safety stands.
2. Remove the wheels.
3. Remove the disc pad in the sequence shown in
the figure.
Warning
Asbestos dust is hazardous to one's health.
Do not blow away the dust with compressed
air.
4. Install in the reverse order of removal.
I. Clip 4. Pad spring 7. Bolt
2. Flexible hose 5. Outer pad and shim 8. Caliper
3. Pad pin 6. Inner pad and shim 9. Guide plate
Ii-26