Mazda 323 1988 Workshop Manual page 972

POWER DOOR LOCK 15
b
INSPECTION
Door Lock Switch
Check for conductivity between the terminals,
a
b c
Locked
*---o
Unlocked
0 0
W : Indicates conductive
Actuator
1. Connect the 12V to the "b" terminal and the
ground to the "a" terminal, and check that the ac-
tuator locks.
2. Reverse the above connections, and check that
the actuator unlocks.
Door Lock Timer Unit
1. Check the conductivity between the terminals.
Terminals b onductivty
Terminals Conductivily Terminals >onduniv&y
a-b X b--d
x
c-h X
a--c 0 b-e
X d--e
0
1 b--c I x I c--f
I 0 I f-h
I x I
Note
a) Set the tester to xlOOOhd range.
b)Conductlve includes the state with resis-
tance, and Non-conductive means in-
sulated.
2. Connect the 12V to the "b" terminal and the
ground to the "a" terminal. Then, short circuit the
"h" and "d" terminals between the "h" and "c"
terminals, and check that the relay clicks.
15-77