10
STEERING
GEAR AND LINKAGE
9. Apply grease to the pinion and upper bearing
and
then install them.
IO. Torque the housing
cover, then loosen it IO'--20%
Tighten
torque
5-9
N.m
(50-90
cm-kg,
4.3-7.8
in-lb)
11, Lock the housing
cover by tightening
the lock nut.
Tightening
torque:
40-50
N,m
(4-5
m-kg,
28.9-36.2
ft-lb)
12. Install the adjustment
cover to the gear housing
and tighten the adjustment
cover, then loosen the
cover by 45O.
Tightening
torque:
4.5-5.5
N.m
(45-55
cm-kg,
39.1-47.7
in-lb)
Measure
the pinion
torque
using the SST.
Standard
pinion
torque:
0.6-l
.5
N.m
(6-15
cm-kg,
0.62-1.3
in-lb)
Pull
scale:
600-1,500
g (21.2-53.0
oz)
If the pinion torque is not with in the standard
range,
readjust the pinion torque
by adjusting
the cover.
15. Lock the cover by tightening
the lock nut
lo-56